**************************************************************************
USACE / NAVFAC / AFCEC / NASA UFGS-35 59 13.14 20 (February 2018)
------------------------------------
Preparing Activity: NAVFAC Superseding
UFGS-35 59 13.1
4 20 (February 2010)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated October 2022
**************************************************************************
SECTION TABLE OF CONTENTS
DIVISION 35 - WATERWAY AND MARINE CONSTRUCTION
SECTION 35 59 13.14 20
POLYMERIC PILES
02/18
PART 1 GENERAL
1.1 REFERENCES
1.2 DEFINITIONS
1.3 SUBMITTALS
1.4 DELIVERY, STORAGE, AND HANDLING
1.5 BASIS OF BIDS
1.5.1 Polymeric Piles
PART 2 PRODUCTS
2.1 PILE CLASSIFICATION
2.2 POLYMERIC PILES
2.3 PERFORMANCE REQUIREMENTS
2.4 PERFORMANCE CHARACTERISTICS
2.4.1 Allowable Moment Capacity
2.4.2 Allowable Axial Capacity
2.4.3 Flexural Rigidity (EI)
2.4.4 Allowable Shear Capacity
2.4.5 Allowable Stresses
2.5 SIZE TOLERANCES
2.6 MATERIALS
2.6.1 Physical Properties
2.6.2 Type III and IV Polymeric Piles
2.6.2.1 Placement of Reinforcing
2.6.3 Type V Polymeric Piles
2.6.3.1 Polymeric Composite Tube
2.6.3.2 Outer Surface
2.6.3.3 Inner Surface
2.6.3.4 Concrete Fill
2.6.3.5 HDPE Sleeve
2.6.3.6 Type VI Hollow Polymeric Piles
2.6.3.6.1 Hollow Polymeric Composite Tube
2.6.3.6.2 Concrete Fill
SECTION 35 59 13.14 20 Page 1
