GGG-T-2761
5 June 1991
--------------
SUPERSEDING
MIL-T-82009B(YD)
18 May 1984
FEDERAL SPECIFICATION
TONGS, MATERIAL LIFTING, PIPE
This specification is approved by the Commissioner, Federal
Supply Service, General Services Administration, for the use
of all Federal agencies.
1. SCOPE
1.1 Scope. This document covers two classes of metal tongs for lifting
materials such as pipe and conduit.
1.2 Classification. Unless otherwise specified (see 6.2), tongs are of the
following classes and sizes. When specified (see 6.2), liners for tongs are to
be provided for handling pipe of outside diameter (od) as specified (see 6.2).
Class I - Cast aluminum
Class II - Steel
Size 4 - For use with 4-1/2 inch od pipe
Size 6 - For use with 6-5/8 inch od pipe
Size 8 - For use with 8-5/8 inch od pipe
Size 10 - For use with 10-3/4 inch od pipe
Size 12 - For use with 12-3/4 inch od pipe
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and
standards form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those listed in the issue
of the Department of Defense Index of Specifications and Standards (DODISS) and
supplement thereto, cited in the solicitation (see 6.2).
*-----------------------------------------------------------------------------*
*Beneficial comments (recommendations, additions, deletions) and any pertinent*
*data which may be of use in improving this document should be addressed to: *
*Commanding Officer (Code 156), Naval Construction Battalion Center, Port *
*Hueneme, CA 93043, by using the self-addressed Standardization Document *
*Improvement Proposal (DD Form 1426) appearing at the end of this document or *
*by letter. *
*-----------------------------------------------------------------------------*
FSC 3940
DISTRIBUTION STATEMENT A. Approved for public release, distribution is
unlimited.
Downloaded from http://www.everyspec.com
