J-L-2744
31 December 1990
----------------
SUPERSEDING
MIL-L-741D
10 August 1984
LEADS, ELECTRICAL, ARC-WELDING
This specification is approved by the Commissioner, Federal
Supply Service, General Services Administration, for the use
of all Federal agencies.
1. SCOPE
1.1 Scope. This document covers extra flexible, single-conductor,
electrical, arc-welding, leads with heavy-duty jacket suitable for use up to
600 volts.
1.2 Classification. Leads will be of the following sizes and grades, as
specified (see 6.2):
Size 2 - No. 2 American Wire Gage (AWG)
Size 1/0 - No. 1/0 AWG
Size 2/0 - No. 2/0 AWG
Grade A - Moderate-low temperature (oil/solvent resistant)
Grade B - Low temperature (oil/solvent resistant)
Grade C - Low temperature (non-oil/solvent resistant)
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications, standards, and handbooks. The following
specifications, standards, and handbooks form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DODISS) and supplement thereto, cited in the
solicitation (see 6.2).
*-----------------------------------------------------------------------------*
*Beneficial comments (recommendations, additions, deletions) and any pertinent*
*data which may be of use in improving this document should be addressed to: *
*Commanding Officer (Code 156), Naval Construction Battalion Center, Port *
*Hueneme, CA 93043-5000, by using the self-addressed Standardization *
*Document Improvement Proposal (DD Form 1426) appearing at the end of this *
*document or by letter. *
*-----------------------------------------------------------------------------*
FSC 6150
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
