1“
●
WIRE,
kE!!3!@
J-W-117713B
June 10, 1988
SUPERSEDING
.7-W-l17713A
September 27, 1976
FEDERAL SPECIFICATION SHEET
MAGNET, ELECTRICAL, CLASS 105, TYPE SN,
SOLDERABLE POLYAMIDE COATED, ROUND
This specification is approved by the Commissioner, Federal Supply
Service, General Services Administration, for the use of all Federal
agencies.
The requirements for acquiring the wire described herein shall consist of this
specification and the latest issue of J-W-1177.
Classification:
Class 105; type SN (single), type SN2 (heavy); round.
Insulating materials:
The film shall be based on a polyamide resin.
NEMA/ANSI equivalent:
All test requirements except thermal endurance are
equivalent to MU-6 of NEMA MU 1000.
General requirements:
See J-W-1177 for general requirements, quality
assurance provisions, and packaging.
Requirements:
●
Test procedure,
Wire sizes,
Characteristics
see j-w-1177
Dimensions
Adherence and
flegibility
Elongation
Heat shock
Springback
Dielectric strength
Continuity
Thermoplastic flow
4.7.1.2
4.7.2.1
4.7.5
4.7.4
4.7.7
4.7.9
4.7.10
4.7.11
4.7.8
l&44
14-44
14-44
14-44
14-30
14-44
31-44
14-30
lB, 36
Requirements
See table I.
No cracks visible in the film
coating.
Not less than the value in
table II.
No cracks visible in the coating
after conditioning as shown in
table 111.
Not greater than the value in
table IV.
Not less than the value in
table V.
The number of discontinuities
shall be not greater than the
number listed in table VI.
Median not less than 170°C with
heavy film coated wire.
10
N-KC NJA
FSC 6145
DISTRIBUTION STATEMENT A Approved for public release; distribution unlimited
lof6
Downloaded from http://www.everyspec.com
