I
~
J-w-1177/14B
June 10, 198B
SUPERSEDING
●
I
J-w-1177/14A
September 27, 1976
FEOERAL SPECIFICATION SHEET
WIRE, MAGNET, ELECTRICAL, CLASS 200, TYPE K,
POLYESTER, POLYESTER-IMIDE OR POLYESTER-AMIDE-IMIDEOVERCOATED
WITH POLYAMIDE-IMIDE, ROUND
This specification is approved by the Commissioner, Federal Supply Service,
General Services Administration, for the use of all Federal agencies.
The requirements for acquiring the wire described herein shall consist of this
specification and the latest issue of J-W-1177.
Classification: Claas ZOO; type K (single), type K2 (heavy),
tYPe K3 (triple); round.
Insulating materials: The conductor shall be coated with a dual film.
The underlying coating shall be based on a
polyeeter, polyester-imide or a polyester-amide-imide
resin.
The superimposed coating shall be baaed
on a polyamide-imide resin.
NSMA/ANSI equivalent:
All teat requirements except thermal endurance
are equivalent to MU-35 of NEMA MW 1000.
General requirements:
See J-W-1177 for general requirements, quality
assurance provisions, and packaging.
Requirements:
Test procedure,
Characteristics see J-W-1177
Dimensions 4.7.1.2
Adherence and
4.7.2.1
flexibility
Elongation 4.7.5
Heat shock 4.7.4
Wire sizes,
AwG
Requirements
4-44 See table I.
4-44
No cracks visible in the
film coating.
4-44
Not less than the value in
table II.
4-44 No cracks visible in the
coating after conditioning
aa shown in table III.
AMSC N/A
FSC 6145
‘o
DISTRIBUTION STATEMENT A Approved for public release; distribution unlimited
lof B
Downloaded from http://www.everyspec.com
