‘J
,
J-W-1177/25B
June 10, 1988
SUPERSEDING
J-U-l 177125A
September 27, 1976
FEDERAL SPECIFICATION SHEET
WIRE, MAGNET, ELECTRICAL , CLASS 155, TYPE DgV,
POLYESTER-GLASS-FI BER-COVERED , RECTANGULAR
This specification is approved by the Commissioner, Federal Supply Service,
Ceneral Services Administration, for the use of all Federal agencies.
The requirements for acauirine the wire described herein shall consist of this
specification and the
Classification:
l~test ~saue of J-W-1177.
Insulating materiala:
NEMA/ANSI equivalent:
General requirements:
Class 155;
type
Dg2 (bare with double polyester-glass
fiber, unvarnished) ,
type Og2V (bare with double polyester-glass
fiber, varnished) ,
type B20g and type B2Dg2 (heavy film, single or
double polyester-glass fiber, unvarnished ),
type B2DgV and type B2Dg2V (heavy film, single
or double polyester-glass fiber, varnished);
rectangular.
The fiber cavering and application of the covering
shall be as specified in J-W-1177.
If an under-
lying film coating ia used, it shall have a class
130 rating.
The varniah used in treating fibrous
covered wire shall conform to the requirements of
claaa 155 of MIL-I-24092, or an alternate selected
on the basia of equivalent test data. The varnish
used shall be identified in the qualification test
repart.
All test requirements are equivalent to NW-46 af NEMA
Mw
1000.
See J-W-1177 for general requirements, quality
assurance provisions, and packaging.
●
AMSC NfA
FSC 6145
DISTRIBUTION STATENENT A Approved for public release; distribution unlimited
lof8
Downloaded from http://www.everyspec.com
