I
I
.1
~
J-W-1177/26B
June 10, 1988
SUPERSEDING
J-w-1177/26A
September 27, 1976
WIRE,
FEDERAL SPECIFICATION SHEET
MAGNET, ELECTRICAL, CLASS 180,
POLYESTER-GLASS-FIBER, SILICONE TREATED;
TYPE Dgli,
RECTANCULM
This specification is approved by the Commissioner, Federal Supply Service,
General Services Administration, for the use of all Federal agencies.
The requirements for acquiring the wire described herein shall consist of this
specification and the latest issue of J-W-1177.
Classification: Class 180;
type Dg2H (bare with double polyester-glass fiber,
eilicone varnished),
type L2DgH and type L2Dg2H (heavy film, single or
double polyester-glass fiber, silicone varnished);
rectangular.
Insulating materials: The fiber covering and application of the covering
shall be as specified in J-W-1177.
If an under-
lying film coating is used, it shall have a class
155 rating. The varnish used in treating fibrous
covered wire shall conform to the requirementsof
class 180 of MIL-I-24092, or an alternate selected
on the basis of equivalent test data.
The varnish
shall be a modified silicone insulating varniah or
silicone compound to provide a tough outer finish.
The varniah used shall be identified in the quali-
fication test report.
NE?4A/AWSIequivalent:
All test requirements are equivalent to !fii-48of
WEMA MU lDDO except thermal rating.
General requirements:
See J-W-1177 for general requfrementa, quality
aasurance provisions, and packaging.
I
AMSC NfA
DISTRIBUTION STATEMENT A
o
FSC 6145
Approved for public release; distribution unlimited
lof8
Downloaded from http://www.everyspec.com
