IwE!!wl
J-Wl177/33
June 10, 1988
FEDEILiLSPECIFICATION SHEET
WIRE, MAGNET, ELECTRICAL, CLASS 180, TYPE GO,
GLASS-FIBER-COVERED, ORGANIC VARNISH TREATED, RECTANGULAR
This specification is
approved by the commissioner} Federal SUPPIY SerViCeY
General Services Administration, for the use of all Federal agencies.
The requirements for acquiring the wire described herein shall.consist of this
specification and the latest issue of J-W-1177.
Classification:
Class 180;
tj~peG20 (bare with double glass fiber covered,
varnished),
type L2G0 and type L2G20 (heavy film, single or
double glass fiber covered, varnished);
rectangular.
Insulating materials:
The f:ber covering and application of the covering
shall be as specified in J-W-1177*
If an under-
lying film coating is used, it shall have a class
155 rating.
The varnish used in treating fibrous
covered wire shall conform to the requirements of
class 180 of MIL-I-24092, or an’alternate selected
on the basis of equivalent test data.
The varnish
shall be a high temperature non-silicone insulating
varnish. The varnish used shall be identified in
the qualification test report.
NEMA/ANSI equivalent:
All te~t requirements are equivalent to MW-52 of
NEMA MI?1000.
General requirements:
See J-W-1177 for general requirements, quality
assurance provisions, and packaging-
AMSC N/A
FSC 6145
DISTRIBUTION STATEMENT A
Approved for public release; distribution un~inited
Downloaded from http://www.everyspec.com
