——
lINCH-POUNDl
I
1
J-w-1177/34
June 10, 1988
FEDEML SPECIFICATION SHEET
WIRE, MAGNET, ELECTRICAL, CLASS 180, TYPE DgO,
POLYESTER-GLASS-FIBER-COVE~D, ORGANIC VARNISH TREATED, RECTANGULAR
This specification is approved by the Commissioner, Federal Supply Service,
General Services Ministration, for the use of all Federal agencies.
The requirements for acquiring the wire described herein shall consist of this
specification and the latest issue of J-W-1177.
Classification:
Class 180;
type Dg20 (bare with double polyester-glass fiber
covered, varnished),
type L2Dg0 and type L21)g20(heavy film, single or
double polyester-glass fiber covered, varnished);
rectangular.
Insulating materials:
The fiber covering and application of the covering
shall be as specified in J-W-1177.
If an under-
lying film coating is used, it shall have a class
155 rating.
The varnish used in treating fibrous
covered wire shall conform to the requirements of
class 180 of MIL-I-24092, or an alternate selected
on the basi8 of equivalent test data,
The varnish
shall be a high temperature non-silicone insulating
varnish. The varnish used shall be identified In
the qualification test report.
NEMA/ANSI equivalent:
All test requirements are equivalent to MW-53 of
NEMA Mw 1000.
General requirements:
See J-W-1177 for general requirements, quality
assurance provisions, and packaging.
-
AMSC N/A
FSC 6145
DISTRIBUTION STATEMENT A Approved for public release; distribution unlimited
I
1 of 12
I
1
Downloaded from http://www.everyspec.com
