J-W-1177/36
June 10, 1988
FEDERAL SPECIFICATION SHEET
I
WIRE, MACNET, ELECTRICAL, CLASS 200, TYPE PAP,
AROHAT?C POLYAMIDE-PAPER-COVERED, ROUND
+
This specification is approved by the Commissioner, Federal Supply Service,
General Services Administration, for the use of all Federal agencle6.
I
I
I
1
The requirements for acquiring the wire described herein shall consist of this
specification and the latest issue of J-W-1177.
Classification:
Class 200; type PAP/2 (bare with 2-roilpaper),
type PAP/3 (bare with 3-roilpaper); round.
Insulating materials:
The insulating material shall be an aromatic polya-
mide paper.
The paper shall be either a nominal
0~002 or 0.003 inches in thickness.
The paper
covering shall consist of one
or more tapes, each
wrapped firmly, closely, evenly and continuously
around the wire in a configuration necessary to
provide the specified number of tape layers (thick-
ness of paper insulation).
The paper covering
shall consist of at least two thicknesses of paper
with not less than 40 percent overlap. If an
adhesive is specified, this material shall perform
in the applicable insulation system as required
by the thermal class designation.
NEMA/ANSI equivalent:
All test requirements are equivalent to MW-61 of
NH’4AHW
1000.
General requirements:
See J-W-1177 for general requirements,
quality
assurance provisions, and packaging.
..
A!!SC N:A
Fs~ ~j~~
DISTRIBUTION.STATEMENT A Approved for pubiic release; distribution unlimited
lof5
Downloaded from http://www.everyspec.com
