.. .. .
.
,. .---- ---
...-.
-..
-
IINCH-POUND[
J-W-1177/47
June 10, 1988
FEDEML SPECIFICATION SHEET
WIRE, MAGNET, ELECTRICAL, CLASS 90, TYPE F,
NYLON-COVERED, ROUND
This specification is approved by the Commissioner, Federal Supply Service,
General Services Administration,for the use of all Federal
agenciesc
The requirements for acquiring the wire described herein shall consist of this
specification and the latest issue of J-W-1177.
Classification:
insulating materials:
NEMA/ANSI equivalent:
General
requi~~meil~s:
Requirements:
Class 90; type F (single nylon covered and me
F2 (double nylon covered); round.
The nylon shall be of good quality and substantially
free from knots, ravelings, foreign matter and
other irregularities.
The fiber covering and
application.of the covering shall be as specified
in J-W-1177.
Mmenuion., elongation and coverage requiremen~sare
equivalent to MW-22 of NEMA MW 1000.
~c J+ml-i:~~
-----
for gelleLal
req-tiinmerlts,‘“--’“--
quaAALy
assurance provisions, and packaging.
Test procedure,
Wire sizes,
Characteristics
see J-W-1177
AWG
Dimensions
4.7el.2
24-40
Elongation
4.7.5 24-40
Coverage
—
24-40
Requirements
See table 1.
Not less than the values shown
in table 11.
The covering shall not open
sufficiently to expose bare
copper when the specimen is
wound 10 turns around a
mandrel having a diameter
equal to 10 times the diameter
of the bare wire.
Normal vision
shall be usedo
—.
AMSC N/A
)
?sc 6145
DISTRIBUTION STATZMENT A Approved for public release: distribution unlimited
lof4
Downloaded from http://www.everyspec.com
