JJ-N-180H
27 March 2015
SUPERSEDING
JJ-N-180G
20 July 1978
FEDERAL SPECIFICATION
NETS, LAUNDRY
The General Services Administration has authorized the use of this federal
specification by all federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers the requirements for a laundry net in the form of bags.
1.2 Classification. The laundry nets shall be of the following types. Styles, and sizes , as
specified (see 6.2).
Type I - Bench, cabinet, floor stand or pedestal mounted.
Type II - Without grommets.
Style A - Leno weave (Nylon).
Style B - Warp net (Nylon or Nylon/Polyester)
Size 2 - 12 by 22 inches (305 by 559 mm).
Size 4 - 24 by 36 inches (610 by 914 mm).
2. APPLICABLE DOCUMENTS
2.1 Government publications . The following documents, of. the issues in effect on date of
invitation for bids or request for proposal, form a part of this specification to the extent specified
herein.
Commercial Item Description:
A-A-203 - Paper, Kraft, Untreated
A-A-59826 - Thread, Nylon
Comments, suggestions, or questions on this document should be addressed to DLA Troop
Support – Industrial Hardware Division (ATTN: Code FHTE), 700 Robbins Avenue, Philadelphia,
PA 19111-5096 or email trpsptspecspa@dla.mil
. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST Online database at
Downloaded from http://www.everyspec.com
