KKK—T—683F
15 December 2010
SUPERSEDING
KKK—T—683E
w/AMENDMENT 1
11 July 2005
FEDERAL SPECIFICATION
TRUCKS, HAND, TWO—WHEELED
The General Services Administration has authorized the use of this
federal specification by all federal agencies.
I. SCOPE AND CLASSIFICATION
1.1 Scope
. This specification covers the requirements for five types of two—
wheeled hand trucks.
1.2 Classification
. The hand trucks covered by this specification shall be of
the following types, as specified (see 6.2):
Type I - Drum.
Type II — Gas cylinder.
TypeIII - General utility.
Type V — Welder tank, 2 cylinder capacity.
Type VI — Stair climbing.
2. APPLICABLE DOCUMENTS
2.1 Government publications
. The issues of the following documents, in effect
on the date of invitation for bids or request for proposal, form a part of this
specification to the extent specified herein.
Federal Standards:
FED—STD—H28 — Screw—Thread Standards for Federal Services
FED—STD—595/13538 — Yellow, Gloss
Military Specifications:
MIL-T-704 - Treatment and Painting of Material
AMSC N/A FSC 3920
Comments, suggestions, or questions on this document should be addressed to Defense
Supply Center Philadelphia (DSCP), ATTN: DSCP-ITAA, 700 Robbins Avenue.,
Philadelphia, PA 19111-5096 or e-mail to dscpg&inspecomments@dla.mil. Since
contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at https://assist.daps.dla.mil
.
INCH-POUND
Downloaded from http://www.everyspec.com
