*-----------------*
* NOT MEASUREMENT *
* SENSITIVE *
*-----------------*
KKK-T-2819
July 23, 1993
SUPERSEDING
MIL-T-29197A(YD)
15 August 1988
FEDERAL SPECIFICATION
TRUCK, CLEANER, CATCH BASIN, VACUUM-PRESSURE JET, DED
This specification is approved by the Commissioner, Federal
Supply Service, General Services Administration, for the use
of all Federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers truck-mounted vacuum catch basin and
sewer cleaners which use a high-velocity-pressure jet for removing sludge and
debris from drainage lines, and simultaneously vacuum the sludge and debris
from the catch basin or manhole.
1.2 Classification. The cleaners furnished shall be of the following
types and sizes (see 6.2).
Type I - For 25-foot (7600 millimeter [mm]) depth operation
Size 1 - With a minimum 9 cubic yard (6.9 cubic meter [m3])
payload capacity body and a minimum length of 112 inches
(2850 mm)
Size 2 - With a minimum 14 cubic yard (10.7 m3) payload capacity
body and a minimum length of 144 inches (3660 mm)
Type II - For up to 100-foot (31 m) depth operation
Size 2 - With a minimum 14 cubic yard (10.7 m3) payload capacity
body and a minimum length of 144 inches (3660 mm)
*-----------------------------------------------------------------------------*
*Beneficial comments (recommendations, additions, deletions) and any pertinent*
*data which may be of use in improving this document should be addressed to: *
*Commanding Officer (Code 156), Naval Construction Battalion Center, *
*621 Pleasant Valley Road, Port Hueneme, CA 93043-4300, by using the *
*Standardization Document Improvement Proposal (DD Form 1426) appearing at *
*the end of this document or by letter. *
*-----------------------------------------------------------------------------*
FSC 2320
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
