*------------*
* INCH POUND *
*------------*
OO-C-2774
30 August 1991
SUPERSEDING
MIL-C-28614C(YD)
29 November 1985
FEDERAL SPECIFICATION
CRANES, ROUGH TERRAIN, HYDRAULIC,
FULL REVOLVING, WHEEL MOUNTED, 4X4, DED
This specification is approved by the Commissioner, Federal
Supply Service, General Services Administration, for the use
of all Federal agencies.
1. SCOPE
1.1 Scope. This specification covers diesel-engine-driven, wheel
mounted, 4X4 360 degree (o) full revolving superstructure with cab,
hydraulically operated cranes.
1.2 Classification. Cranes shall be one of the following sizes, as
specified (see 6.1):
Size A - 15-ton capacity, minimum
Size B - 30-ton capacity, minimum
Size C - 60-ton capacity, minimum
Size D - 90-ton capacity, minimum
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications, standards, and handbooks. The following
specifications, standards, and handbooks form a part of this specification
to the extent specified herein. Unless otherwise specified, the issues of
these documents are those listed in the issue of the Department of Defense
Index of Specifications and Standards (DODISS) and supplement thereto,
cited in the solicitation (see 6.1).
*-----------------------------------------------------------------------------*
*Beneficial comments (recommendations, additions, deletions) and any pertinent*
*data which may be of use in improving this document should be addressed to: *
*Commanding Officer (Code 156), Naval Construction Battalion Center, Port *
*Hueneme, CA 93043-5000, by using the self-addressed Standardization *
*Document Improvement Proposal (DD Form 1426) appearing at the end of this *
*document or by letter. *
*-----------------------------------------------------------------------------*
FSC 3810
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
