OO-J-571F
27 March 2015
SUPERSEDING
OO-J-571E
20 June 1986
FEDERAL SPECIFICATION
JOINTERS, WOODWORKING
The General Services Administration has authorized the use of this federal
specification by all federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers motor driven woodworking jointers for hand-feed jointing,
rabbeting, and chamfering of wood workplaces.
1.2 Classification.
1.2.1 Types, classes, and sizes. The jointers shall be of the following types, classes, and sizes,
as specified (see 6.2.1):
Type I - B
ench, cabinet, floor stand or pedestal mounted.
Class A - Direct drive.
Size 8 - 8-inch cutting width
Size 12 - 12-inch cutting width
Class B - V-belt drive.
Size 4 - 4-inch cutting width
Size 6 - 6-inch cutting width
Size 8 - 8-inch cutting width
Size 12 - 12-inch cutting width
Type II - Floor mounted.
Class A - Direct drive.
Size 12 - 12-inch cutting width
Size 16 - 16-imch cutting width
Size 20 - 20-inch cutting width
Size 24 - 24-inch cutting width
Size 30 - 30-inch cutting width
Comments, suggestions, or questions on this document should be addressed to DLA Troop
Support – Industrial Hardware Division (ATTN: Code FHTE), 700 Robbins Avenue, Philadelphia,
PA 19111-5096 or email trpsptspecspa@dla.mil
. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST Online database at
https://assist.dla.mil .
1
Downloaded from http://www.everyspec.com
