*-----------------*
* NOT MEASUREMENT *
* SENSITIVE *
*-----------------*
OO-P-2873
June 2, 1994
------------
SUPERSEDING
MIL-P-52554B
28 January 1989
FEDERAL SPECIFICATION
PRESS, HYDRAULIC, PORTABLE, WITH DIES FOR SWAGING, 500-TON,
GASOLINE-ENGINE-DRIVEN
This specification is approved by the Commissioner, Federal Supply Service,
General Services Administration, for the use of all Federal agencies.
1. SCOPE
1.1 Scope. This specification covers a portable hydraulic press for swaging
ferrules and sleeves onto wire rope.
1.2 Measurement conversion. Values used herein in the inch/pound system are
converted to the metric system conforming to FED-STD-376 (see 6.9).
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and
standards form a part of this specification to the extent specified herein.
Unless otherwise specified, the issues of these documents are those listed in
the issue of the Department of Defense Index of Specifications and Standards
(DODISS) and supplement thereto, cited in the solicitation (see 6.2).
Federal Specifications
W-B-131 - Battery Storage, (Vehicular, Ignition, Lighting and
Starting)
RR-W-410 - Wire Rope and Strand
UU-T-81 - Tags, Shipping, and Storage
*-----------------------------------------------------------------------------*
*Beneficial comments (recommendations, additions, deletions) and any pertinent*
*data which may be of use in improving this document should be addressed to: *
*Commanding Officer (Code 156), Naval Construction Battalion Center, *
*1000 23rd Avenue, Port Hueneme, CA 93043-4301, by using the Standardization *
*Document Improvement Proposal (DD Form 1426) appearing at the end of this *
*document or by letter. *
*-----------------------------------------------------------------------------*
AMSC N/A FSC 3442
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
