*------------*
* INCH-POUND *
*------------*
OO-R-2741
September 21, 1992
SUPERSEDING
MIL-R-23954D
20 May 1983
FEDERAL SPECIFICATION
REFUSE CONTAINERS, HOISTING UNIT; TILT-OVER,
FOR FRONT LOADING COMPACTION TYPE TRUCKS
This specification is approved by the Commissioner, Federal
Supply Service, General Services Administration, for the use
of all Federal agencies.
1. SCOPE
1.1 Scope. This document covers steel refuse containers operationally
suitable for use with front loading, compaction type body, refuse collection
trucks procured under MIL-T-46701 and MIL-T-46748.
1.2 Classification. Unless otherwise specified (see 6.2), refuse containers
are of the following classes, types, and sizes as specified (see 6.2) (see
figures 1 through 4 for illustrations).
Class I - Equipped for use with two point container hoisting device
Class II - Equipped for use with single and two point container hoisting
devices
Class III - Equipped for use with single point container hoisting device
Type A - Top and end loading
Size 3 - 3 cubic yards net volume
Size 4 - 4 cubic yards net volume
Size 5 - 5 cubic yards net volume
Size 6 - 6 cubic yards net volume
Size 8 - 8 cubic yards net volume
*-----------------------------------------------------------------------------*
*Beneficial comments (recommendations, additions, deletions) and any pertinent*
*data which may be of use in improving this document should be addressed to: *
*Commanding Officer (Code 156), Naval Construction Battalion Center, *
*621 Pleasant Valley Road, Port Hueneme, CA 93043-4300, by using the *
*self-addressed Standardization Document Improvement Proposal (DD Form 1426) *
*appearing at the end of this document or by letter. *
*-----------------------------------------------------------------------------*
FSC 3990
DISTRIBUTION STATEMENT A. Approved for public release, distribution is
unlimited.
Downloaded from http://www.everyspec.com
