*-----------------*
* NOT MEASUREMENT *
* SENSITIVE *
*-----------------*
OO-R-2783
9 March 1992
SUPERSEDING
MIL-R-23144E
14 June 1985
FEDERAL SPECIFICATION
ROLLER, TOWED, OPEN-FACE TYPE, TWO DRUM
This specification is approved by the Commissioner, Federal
Supply Service, General Services Administration, for the use
of all Federal agencies.
1. SCOPE
1.1 This specification covers a two drum, open-face (grid) type, towed
roller.
* 2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and
standards form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those listed in the issue
of the Department of Defense Index of Specifications and Standards (DODISS) and
supplement thereto, cited in the solicitation (see 6.2).
Federal Standards
FED-STD-H28 - Screw-Thread Standards for Federal Services
Military Standards
MIL-STD-209 - Slinging and Tiedown Provisions for Lifting and Tying Down
Military Equipment
*-----------------------------------------------------------------------------*
*Beneficial comments (recommendations, additions, deletions) and any pertinent*
*data which may be of use in improving this document should be addressed to: *
*Commanding Officer (Code 156), Naval Construction Battalion Center, Port *
*Hueneme, CA 93043-5000, by using the Standardization Document Improvement *
*Proposal (DD Form 1426) appearing at the end of this document or by letter. *
*-----------------------------------------------------------------------------*
FSC 3895
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
