m-s-00256 G(GL)
June 11, 1985
Interim revision of
Fed. Spec. CX3-S-256F
November 16, 1978
INTERIM FEDERAL SPECIFICATION
SEWING MACHINE, INDUSTRIAL & GENERAL SPECIFICATION FOR
This interim Federal Specification was developed by the U.S. Army Natick
Research and Development Center (GL), Natick, MA 01760-5014 based upon
currently available technical information.
It is recommended that Federal
Agencies use it in procurement and forward recommendations for changes to
the preparing activity at the address shown above.
The General Services Administration has authorized the use of this interim
Federal Specification as a valid exception to 00-s-256, dated November 16,
1978.
1. SCOPE
1.1 m. This specification covers the general requirements for
commercial, industrial sewing machines used in the textile and leather
industry.
2.
APPLICABLE DOCUMENTS
2.1 The following documents of
for bids or request for proposal,
extent specified herein.
Federal Specification:
the issue in effect
form a part of this
HH-I-553 - Insulation Tape, Electrical
Synthetic)
on date of invitation
specification to the
(Rubber, Natural and
QQ-S-571
- Soider, Tin Alloy:
Tin, Lead Alloy; and Lead Alloy
TT-V-119
- Varnish, Spar, Phenolic - Resin
TT-w-572
- Wood Preservative:
Water Repellent
FSC 3530
Downloaded from http://www.everyspec.com
