OO-S-256J/GEN
3 May 2006
SUPERSEDING
OO-S-256H/GEN
August 5, 1986
FEDERAL SPECIFICATION
SEWING MACHINE, INDUSTRIAL,
GENERAL SPECIFICATION FOR
The General Services Administration has authorized
the use of this Federal specification by all Federal
agencies.
1. SCOPE
1.1 Scope
. This specification covers the general requirements for
commercial, industrial sewing machines used in the textile and leather
industry. The specific requirements for the individual sewing machines are
covered by the detail specifications listed in 6.6.
2. APPLICABLE DOCUMENTS
2.1 Government publications
. The following documents, of the issues in
effect on the date of invitation for bids or request for proposal, form a
part of this specification to the extent specified herein.
Federal Regulation
29 CFR 1910 — Occupational Safety and Health Act (OSHA) Standards
(The Code of Federal Regulations (CFR) and the Federal Register (FR)
are for sale on a subscription basis by the Superintendent of Documents, US
Government Printing Office, Washington, DC 20402. When indicated, reprints
of certain regulations may be obtained from the Federal Agency responsible
for issuance thereof.)
AMSC N/A FSC 3530
Comments, suggestions, or questions on this document should be addressed
to: Defense Supply Center Philadelphia, ATTN: DSCP-ITAA, 700 Robbins
Avenue, Philadelphia, PA 19111-5096 or emailed to
dscpg&ispeccomments@dla.mil
. Since contact information can change, you
may want to verify the currency of this address information using the
ASSIST Online database at http://assist.daps.dla.mil
.
INCH-POUND
Downloaded from http://www.everyspec.com
