*------------*
* INCH-POUND *
*------------*
PPP-B-140C
March 1, 1993
SUPERSEDING
PPP-B-140B
15 June 1988
and MIL-P-6063B
22 March 1978
FEDERAL SPECIFICATION
BATTERIES, STORAGE, INDUSTRIAL, AUTOMOTIVE,
AIRCRAFT AND NAVY PORTABLE: PACKAGING OF
This specification is approved by the Commissioner, Federal
Supply Service, General Services Administration, for the use
of all Federal agencies.
1. SCOPE
1.1 Scope. This specification covers the preservation, packaging, packing
and marking of lead acid, nickel-cadmium alkaline storage, and aircraft
batteries with or without electrolyte (charged and dry or uncharged and moist).
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and
standards form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those listed in the issue
of the Department of Defense Index of Specifications and Standards (DODISS) and
supplement thereto, cited in the solicitation (see 6.2).
Federal Specifications
O-S-801 - Sulfuric Acid, Electrolyte, for Storage Batteries
PPP-B-601 - Boxes, Wood, Cleated - Plywood
*-----------------------------------------------------------------------------*
*Beneficial comments (recommendations, additions, deletions) and any pertinent*
*data which may be of use in improving this document should be addressed to: *
*Commanding Officer (Code 156), Naval Construction Battalion Center, *
*621 Pleasant Valley Road, Port Hueneme, CA 93043-4300, by using the *
*Standardization Document Improvement Proposal (DD Form 1426) appearing at *
*the end of this document or by letter. *
*-----------------------------------------------------------------------------*
AREA PACK
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
