~
INCH - Pound
PPP-B-601H
May 22 1989
SUPERSEDING
PPP-B-601G
October 21 1981
FEDERAL SPECIFICATION
BOXES, WOOD, CLEATED-PLYWOOD
This specification is approved by the ‘Commissioner, Federal Supply Service,
General Services Administration,
for the use of all Federal agencies.
1.
SCOPE AND CLASSIFICATION
1.1 Scope.
This specification covers the requirements for new wood cleated-
plywood boxes intended for use as containers
for domestic and overseas shipment
of general materials and supplies (see 6.1).
1.2 Classification.
1.2.1 Types.
Cleated-plywood boxes shall be of the following types, as
specified (see 6.2).
Domestic type (see 6.1.1)
-/
Overseas type (see 6.1.2)
1.2.2 Styles.
Cleated-plywood boxes shall be furnished in the following
styles as specified (see 6.2).
Style A (see figures 1, 2 and 4)
Style B (see figures 1, 3 and 5)
Style I (see figure 1)
Style J (see figure 1)
Beneficial comments (recommendations,
additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Us. Army Natick Research, Development, and Engineering Center, Natick, MA
01760-5014 by using the self-addressed Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 8115
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
