T-R-650
AMENLMNT-1
my 19, 1$+
I
FEDSP.ALSPECIFICATION
ROFE> YARI .AIiDTWINS, EAST FIsER
This amendment, which forms part of Federal Specification T-R-650, dated
December 21, 1567, waB approved by the Commissioner, Federal SuPPly Service,
General Services Administration, for the use of 811 Federal ~gencies.
PAGE 2
Paragraph 2.1, under “Nilitary Stnndati” add:
“f.UL-STD-lZ9 - Marking for Shipment and Storage!’
PAGE
4
Paragraph 3.2.4, second line:
Delete “weigth” and substitute “weight”.
PAGE 5
Table VIII, last column: Delete column heading and 8ubstitute: “Tare (twd.mum)”. In ssme
column, delete “3” both places under “Percent” and substitute “6”.
PAOR 6
Paragraph 4.1, delete and substitute:
k.1 Responsibility for inspection.
Unless otherwise specified in the contract or purchase
order, the supplier is responsible for the perfoz?mnce of all inspection requirements as specified
he?ein.
Except as otherwise specified in the contract.or order, the supplier may use his own or
any other facilities 8uitable for the performance of the inspection requirements specified herein,
unless dis~pproved by the Government.
The Government reserves the right to perform eny of the
inspections set forth in the specification where such inspections are demed neccs8ary to afiaure
that supplies and services conform to prescribed requirements.
PAGE 7
Table XI>
,qT.st method” column: Opposite “stain, Type 111 only”, in first column, delete
“4.3.10” and substitute “4.3,4”.
PAGE
8
Table XI, “Specific.tion reference” column:
OPPOSite “Breaking strength, Type 111 (All design.
ations)”, in first column, delete “3.2.2” end substitute “3.2.3”.
Table XI, “Specification reference” column:
Opposite “Breaking strength ‘fxDeII, classes 1 and 2,
(.11 sizes)” in first column, delete “3.2.2: and substitue “3,2.2.1 and “3.2.2.2”.
Table XI, last entry in “Characteristic” column: Delete “Identification market” and substitute
“Identification marker”.
Footnote~
, m!ccmd line: Delete “has” and .ubstitute “case”.
PAGE
9
Paregraph 4.3.1: Delete “Detenrdnation of turn” end substitute: Determination of turn (type 1
only).”
Add new paragraph b.
3.4 as follows:
4.3.4 ~.
Type 111 polished hemp twine BhP.11
be considered stainless when no Btaining is
visible after applying a pressure of 10 pounds per
nquare foot to a sample, placed betdeen sheeto of white paper, for a period of
16 hours.
Fsc 4020
Downloaded from http://www.everyspec.com
