DATA ITEM DESCRIPTION
Title: CORROSION PREVENTION AND CONTROL PLAN
Number: DI-MFFP-81403A Approved Date: 20150831
AMSC Number: N9571 Limitation: N/A
DTIC Applicable: No GIDEP Applicable: No
Preparing Activity: AS Project Number: MFFP-2015-006
Applicable Forms: N/A
Use/Relationship: This DID contains the format, content and intended use information for
the data deliverable resulting from the technical requirements described in 4.1 of MIL-STD-1568
and 5.1.5 of MIL-STD-1530(USAF).
This DID is applicable to any system acquisition that includes a requirement for a corrosion
prevention and control program and shall be used for the entire system and all major subsystems
including airframe, avionics, engine, launch and recovery systems, mechanical subsystems and
support equipment.
Requirements:
1. Reference Documents. The applicable issue of the documents cited herein, including their
approval dates and dates of any applicable amendments, notices, and revisions, shall be as
specified in the contract.
2. Format. The plan shall be in the contractor’s format.
3. Content. The specific approaches used for corrosion prevention and control (CPC) of
the system shall be documented utilizing the requirements in MIL-STD-1530(USAF),
Aircraft Structural Integrity Program (ASIP) and MIL-STD-1568, Materials and Processes for
Corrosion Prevention and Control in Aerospace Weapons Systems. Additional guidance for
CPC can be found in DoD Corrosion Prevention and Control Planning Guidebook for Military
Systems and Equipment, and MIL-HDBK-1587, Materials and Process Requirements for Air
Force Weapons Systems. The approaches established shall encompass all items procured
under the contract and defined in the scope of work, including installation of Government-
furnished equipment. Copies of the above documents are available at
http://quicksearch.dla.mil
.
3.1 Management considerations: Identify the contractor’s office of primary responsibility,
including relationship to the organization and authority with respect to drawing release and
material and process selections.
3.2 General considerations: Describe processes to insure compliance with corrosion
prevention and control procedures during design/development, manufacturing, materials
handling, packaging, shipping, testing, modification, and operation and at all other time that the
equipment is in custody of the contractor
3.3 Corrosion Reviews: Describe plans for periodic reviews during Engineering &
Manufacturing Development and Production & Deployment to evaluate the adequacy of the
contractor’s efforts in corrosion prevention and control.
3.4 Requirements Derivation: Describe the design usages and service environments that
form the design criteria and are the origin of corrosion prevention and control requirements.
Detail which requirements this plan addresses, including the verification approach used to
meet each basic requirement. Identify data sources (system and subsystem specifications,
corrosion and finish specifications, operational or storage conditions, drainage and venting
requirements, manufacturing conditions, corrosion requirements derived from operational
performance requirements, and usage environments) from which corrosion requirements are
Downloaded from http://www.everyspec.com
