MIL-PRF-14105E
w/AMENDMENT 1
14 August 2013
SUPERSEDING
MIL-PRF-14105E
30 November 2011
PERFORMANCE SPECIFICATION
PAINT, HEAT-RESISTING (FOR STEEL SURFACES)
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a heat-resisting, ambient dry/heat cure paint that
will withstand temperatures to a maximum of 1,400 °F (760 °C). The paint is intended for
use on steel surfaces exposed to high temperatures and exterior weathering. The coating
is free of volatile organic hazardous air pollutants (VOHAP-free). The coating is lead and
hexavalent chromium free.
1.2 Types. The coating will be furnished in the following types as specified (see 6.2).
Type I - Lead and chromate free, volatile hazardous air pollutants-free
(VOHAPS-free) formulation to meet a maximum volatile organic compound
(VOC) content of 3.5 pounds/gallon (lbs/gal) (420 grams/liter (g/l)) as applied.
AMSC N/A FSC 8010
DISTRIBUTION STATEMENT A: Approved for public release; distribution is
unlimited.
Comments, suggestions, or questions on this document should be addressed to: Director, U.S.
Army Research Laboratory, Weapons and Materials Research Directorate, Materials
Manufacturing Technology Branch, Specification and Standards Office, ATTN: RDRL-
WMM-D, Aberdeen Proving Ground, MD 21005-5069 or emailed to
richard.j.squillacioti.civ@mail.mil. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST Online database at
Downloaded from http://www.everyspec.com
