PERFORMANCE SPECIFICATION
PRIMER COATINGS: EPOXY, HIGH-SOLIDS
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for corrosion inhibiting, chemical and
solvent resistant, solvent-borne, epoxy primer coatings that have a maximum volatile
organic compound (VOC) content of 340 grams per liter (g/L)(2.8 pounds per gallon [lb/gal]).
1.2 Classification. The primer coatings will be of the following types and classes, as
specified (see 6.2):
1.2.1 Types. The types of primer coatings are as follows:
Type I - Standard pigments
Type II - Low infrared reflective pigments
1.2.2 Classes. The classes of primer coatings are as follows:
Class C - Strontium chromate based corrosion inhibitors
Class N - Non-chromate based corrosion inhibitors
AMSC N/A FSC 8010
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
NOT MEASUREMENT
SENSITIVE
MIL-PRF-23377H
30 April 2002
SUPERSEDING
MIL-PRF-23377G
30 September 1999
Beneficial comments (recommendations, additions, deletions) and any pertinent data which
may be of use in improving this document should be addressed to: Commander, Naval Air
Warfare Center Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ
08733-5100, by using the Standardization Document Improvement Proposal (DD Form
1426) appearing at the end of this document or by letter.
Downloaded from http://www.everyspec.com