*
2.1
3.6
MIL-B-3060E(AR)
AMENDMENT 4
5 March 1992
SUPERSEDING
AMENDMENT 3
25 March 1991
MILITARY SPECIFICATION
BOXES , SMALL ARMS AMMUNITION: M19A1 AND M2A1
This Amendment forms a part of Military Specification
MIL–B-3060E(AR) , dated 12 December 1979, an”d is approved for
use by the U.S. Army Armament, Munitions and Chemical
Command, and is available for use by all Departments and
Agencies of the Department of Defense.
PAGE 1
STANDARDS, MILITARY, add the following:
“MIL-STD-129 –Marking for Shipment and Storage”
PAGE 4
Delete in its entirety and substitute the following:
“Airtightness of box assembly. The assembled box shall not
release more than 4 bubbles of air when subjected to an air
pressure differential of three (3) pounds per square inch (psi)
when tested in accordance with 4.5.4.1 or 4.5.4.2.
When
airtightness is tested in accordance with 4.5.4.3, the assembled
box shall not release more than 4 cubic centimeters (cc) of
air. “
*
3.6
Change
“4 cubic centimeters” to “.4 cubic centimeters”.
PAGE 13
4.5.4 Delete in its entirety and substitute the following:
“Airtightness of box assembly. The container shall be
conditioned to a minimum temperature of 50°F and ambient
pressure prior to testing.’ The containers shall be tested in
accordance with 4.5.4.1 or with Government approval 4.5.4.2 (see
6.6) or 4.5.4.3 (see 6.7).
A wetting agent may be used to
minimize air bubbles clinging to the exterior surface.”
AMSC N/A
lof8
FSC 8140
DISTRIBUTIONSTATEMENT A.
Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
