MIL-DTL-75J
20 March 2002
SUPERSEDING
MIL-E-75H
22 September 1986
DETAIL SPECIFICATION
ELECTRON TUBES, PACKAGING OF
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope
. This specification covers the requirements for the preservation, packing, and container
marking of electron tubes and associated accessories (see 6.1).
1.2 Classification
. The electron tubes covered by this specification are included within the following
packaging groups.
1.2.1 Groups
.
Packaging group 1
. Receiving tubes and other electron tubes or devices which do not exceed a 6 by
6 by 15 inch (15.24 by 15.24 by 38.1 centimeters) unit pack size.
Packaging group 4
. Cathode ray, picture, storage, and related tube types.
Packaging group 9
. Magnetron and other electron tubes containing permanent magnets.
Packaging group 23
. Electron tubes (except receiving, magnetron, cathode ray, and related tube
types) which do not exceed an 18 by 18 by 40-inch (45.72 by 45.72 by 101.6 centimeters) unit pack
size.
Packaging group 24
. Electron tubes exceeding an 18 by 18 by 40-inch unit pack size.
AMSC N/A FSC 5960
DISTRIBUTION STATEMENT A
. Approved for public release; distribution is unlimited.
INCH-POUND
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of
use in improving this document should be addressed to: Defense Supply Center, Columbus, ATTN:
DSCC-VAT, Post Office Box 3990, Columbus, OH 43216-5000, by using the Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
Downloaded from http://www.everyspec.com
