MIL-DTL-75K
w/AMENDMENT 1
12 April 2012
SUPERSEDING
MIL-DTL-75K
16 January 2007
DETAIL SPECIFICATION
ELECTRON TUBES, PACKAGING OF
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for the preservation, packing, and container
marking of electron tubes and associated accessories (see 6.1).
1.2 Classification. The electron tubes covered by this specification are included within the following
packaging groups.
1.2.1 Packaging group 1. Receiving tubes and other electron tubes or devices which do not exceed a
6 by 6 by 15 inch (15.24 by 15.24 by 38.1 centimeters) unit pack size.
1.2.2 Packaging group 4. Cathode ray, picture, storage, and related tube types.
1.2.3 Packaging group 9. Magnetron and other electron tubes containing permanent magnets.
1.2.4 Packaging group 23. Electron tubes (except receiving, magnetron, cathode ray, and related tube
types) which do not exceed 18 by 18 by 40-inch (45.72 by 45.72 by 101.6 centimeters) unit pack size.
1.2.5 Packaging group 24. Electron tubes exceeding an 18 by 18 by 40-inch unit pack size.
1.3 Part or Identifying Number (PIN). The PIN to be used for packaging of electron tubes acquired to
this specification are created as follows:
M 75 - XX
| | |
Prefix for Military Specification Packaging group
specification number (see 1.2.1)
AMSC N/A FSC 5960
INCH-POUND
Comments, suggestions or questions on this document should be addressed to DLA Land and Maritime,
ATTN: VAT, Post Office Box 3990, Columbus, OH 43218-3990, or emailed to TubesAmps@dla.mil
.
Since contact information can change, you may want to verify the currency of this address information
using the ASSIST Online database at
https://assist.daps.dla.mil.
Downloaded from http://www.everyspec.com
