MIL-DTL-75K
16 January 2007
SUPERSEDING
MIL-DTL-75J
20 March 2002
DETAIL SPECIFICATION
ELECTRON TUBES, PACKAGING OF
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope
. This specification covers the requirements for the preservation, packing, and container
marking of electron tubes and associated accessories (see 6.1).
1.2 Classification
. The electron tubes covered by this specification are included within the following
packaging groups.
1.2.1 Packaging group 1
. Receiving tubes and other electron tubes or devices which do not exceed a
6 by 6 by 15 inch (15.24 by 15.24 by 38.1 centimeters) unit pack size.
1.2.2 Packaging group 4
. Cathode ray, picture, storage, and related tube types.
1.2.3 Packaging group 9
. Magnetron and other electron tubes containing permanent magnets.
1.2.4 Packaging group 23
. Electron tubes (except receiving, magnetron, cathode ray, and related tube
types) which do not exceed 18 by 18 by 40-inch (45.72 by 45.72 by 101.6 centimeters) unit pack size.
1.2.5 Packaging group 24
. Electron tubes exceeding an 18 by 18 by 40-inch unit pack size.
1.3 Part or Identifying Number (PIN). The PIN to be used for packaging of electron tubes acquired to
this specification are created as follows:
M 75 - XX
Prefix for Military Specification Packaging group
specification number (see 1.2.1)
AMSC N/A FSC 5960
INCH-POUND
Comments, suggestions, or questions on this document should be addressed to: Defense Supply
Center Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, OH 43218-3990 or emailed to
Tubesamps@dscc.dla.mil. Since contact information can change, you may want to verify the currency of
this address information using the ASSIST Online database at http://assist.daps.dla.mil
.
Downloaded from http://www.everyspec.com
