AMSC N/A FSC 4020
INCH-POUND
MIL-DTL-226G
3 JUNE 2009
SUPERSEDING
MIL-H-226F
30 September 1982
DETAIL SPECIFICATION
HALYARDS, SIGNAL, BRAIDED TREATED
INACTIVE FOR NEW DESIGN AFTER 16 JUNE 1997
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 SCOPE
. This document covers requirements for cotton or cotton/polyester halyards braided with and
without core.
1.2 Classification
. Halyards will be of the following classes and in the sizes (circumference) specified
(see 6.2).
Class 1 – Without core
Class 2 – With core
2. APPLICABLE DOCUMENTS
2.1 General
. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this standard or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list,
document users are cautioned that they must meet all specified requirements of documents cited in section 3
and section 4 of this specification, whether or not they are listed.
2.2 Government documents
.
2.2.1 Specifications, standards, and handbooks
. The following specifications, standards, and handbooks
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to Defense Supply Center
Philadelphia, ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or email to
dscpg&inspecomments@dla.mil
. Since contact information can change, you may want to verify the currency of
this address information using the ASSIST Online database at http://assist.daps.dla.mil.
Downloaded from http://www.everyspec.com
