MIL-DTL-197M
22 November 2016
SUPERSEDING
MIL-DTL-197L
11 October 2011
DETAIL SPECIFICATION
PACKAGING OF BEARINGS,
ASSOCIATED PARTS AND SUBASSEMBLIES
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1.
SCOPE
1.1
Scope. This specification covers the cleaning, drying, preservation, packaging, and
packaging marking requirements for all types and sizes of stock and production bearings,
associated parts, and subassemblies (see 6.1).
2.
APPLICABLE DOCUMENTS
2.1
General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure
the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2
Government documents.
2.2.1
Specifications and standards. The following specifications and standards form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of
these documents are those cited in the solicitation or contract.
AMSC N/A AREA PACK
NOT MEASUREMENT SENSITIVE
Comments, suggestions, or questions on this document should be addressed to DLA Aviation
VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616, or e-mailed to
STDZNMGT@dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST database at https://assist.dla.mil/.
Downloaded from http://www.everyspec.com
