AMSC N/A FSC 1376
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is unlimited.
MIL-DTL-248D
w/AMENDMENT 1
27 June 2007
SUPERSEDING
MIL-DTL-248D
14 May 2002
DETAIL SPECIFICATION
TRINITROTOLUENE (TNT)
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Trinitrotoluene (TNT). TNT covered by this specification is a high explosive
intended for use in ammunition (see 6.1).
1.2 Classification.. TNT shall be of the following types and forms as specified (see 6.1.1
and 6.1.2):
Type I - Flake or Crystalline Form with a solidification point of 80.20°C min.
Type II - Fine Crystalline Form with a solidification point of 80.40°C min.
Type III - TNT which is recovered/reclaimed through means of an autoclave process, or
equivalent technique, in which the TNT is heated to its melting point by means of
non-contacting steam and allowed to free-flow from a TNT, Type I (solely)-
containing munition item. Type III TNT is in either flake or crystalline form with
a solidification point of 80.20°C min.
2. APPLICABLE DOCUMENTS
2.1 General.
The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
requirements documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
Comments, suggestions, or questions on this document should be addressed to: Commander, U.S. Army
ARDEC, ATTN: AMSRD-AAR-QES-E, Picatinny, New Jersey 07806-5000 or e-mailed to pica-
stdzn@pica.army.mil. Since contact information can change, you may want to verify the currency of this
information using ASSIST Online database at http://assist.daps.dla.mil.
INCH-POUND
Downloaded from http://www.everyspec.com
