INCH-POUND
MIL-DTL-450D
27 January 2011
SUPERSEDING
MIL-C-450C
5 February 1971
DETAIL SPECIFICATION
COATING COMPOUND, BITUMINOUS SOLVENT TYPE,
BLACK (FOR AMMUNITION)
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers an asphalt compound for coating the surfaces of
ammunition cavities prior to filling with explosives. It provides for an additional composition of
material suitable for use in areas with specific air pollution regulations (see 6.1 and 6.4).
1.2 Classification. The coating covered by this specification will be of the following
compositions and types, as specified (see 6.2).
Composition G - General use (all types)
Type I - Low solids (for spray application)
Type II - Medium solids (for spray or brush application)
Type III - Heavy paste
Composition L - Limited use (all types)
Type I - Low solids (for spray application)
Type II - Medium solids (for spray or brush application)
Type III - Heavy paste
Comments, suggestions, or questions on this document should be addressed to
DEPARTMENT OF THE NAVY, Indian Head Division, NSWC, E12P, Document Control,
4123 Artisans Court, Suite 103, Indian Head, MD 20640-5085 OFFICIAL BUSINESS, or
emailed to amanda.penn@navy.mil
. Since contact information can change, you may want to
verify the currency of this information using the ASSIST Online database at
https://assist.daps.dla.mil
.
AMSC N/A FSC 8030
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
