MIL-DTL-508K
INCH-POUND
07 Oct 2005
SUPERSEDING
MIL-C-508J
28 March 1986
DETAIL SPECIFICATION
CLOTH, OXFORD, NYLON, 3 OUNCE
This specification is approved for use by all departments and agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers 3 ounce nylon oxford cloth.
1.2 Classification. The cloth is furnished in the following types and classes as specified (see
6.2):
Type I - For clothing, equipage, and personnel armor
Class 1 - Undyed
Class 2 - Dyed
Class 3 - Dyed and Water Repellent Treated (Quarpel Type)
Class 4 - Woodland Camouflage Printed and Water Repellent Treated (Quarpel Type)
Class 5 - Universal Camouflage Printed and Water Repellent Treated (Quarpel Type)
Type II - For coating
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in Sections 3 or 4, of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in Sections 3 or 4 of this specification,
whether or not they are listed.
AMSC N/A FSC 8305
Comments, suggestions, or questions on this document should be addressed to: Defense
Supply Center Philadelphia, Clothing and Textiles Directorate, Attn: DSCP-COET (Bldg 6),
700 Robbins Avenue, Philadelphia, PA 19111-5092 or emailed to:
http://ct.dscp.dla.mil.
Since contact information can change, you may want to verify the currency of this address
information using Acquisition Streamlining and Standardization Information System
ASSIST
online database at htt
://assist.da
s.dla.mil .
Downloaded from http://www.everyspec.com
