IINCH-POUND I
MIL-DTL-781D
15 August 1997
SUPERSEDING
MIL-T-781C
22 AUGUST 1990
DETAIL SPECIFICATION
TERMINAL; WIRE ROPE SWAGING
This specification is approved
for use by all
Departments and Agencies
of the Department of Defense.
1.
SCOPE
1.1 Scope.
This specification covers wire rope terminals designed
for attachment to wire
1.2 Classification.
specified (see 6.1) :
Type I
- Straight
Type II - Ball-end
rope by swaging.
Terminals should be of the following types, as
shank terminals
terminals
2.
APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specification and standards. The following specifications and
standards form a part
of this specification to the extent specified
herein.
Unless otherwise specified, the issues of these documents
should be those listed in the issue of the Department of Defense Index
of Specifications and Standards (DODISS)and supplement thereto, cited in
the solicitation (see 6.2) .
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Defense Industrial Supply Center, attn.: DISC-EED, 700 Robbins Avenue,
Philadelphia, PA
19111-5096. by using the self-addressed Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 4030
DISTRIBUTION STATEMENT
A.
Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
