Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of
use in improving this document should be addressed to: Commander, Naval Sea Systems Command,
ATTN: SEA 05Q, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160
by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end
of this document or by letter.
AMSC N/A FSC 6145
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
INCH-POUND
MIL-DTL-915G
22 August 2002
SUPERSEDING
MIL-C-915F
14 March 1988
DETAIL SPECIFICATION
CABLE, ELECTRICAL, FOR SHIPBOARD USE,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers electrical cable for Navy shipboard applications.
1.2 Classification. Cables covered by this specification will be classified as watertight with
circuit integrity and non-watertight constructions, and further classified for flexing and nonflexing service
for power, lighting, control, communications, instrumentation and electronic applications, as specified in
1.2.1 through 1.2.4 (see 6.2).
1.2.1 Watertight, nonflexing service. Cable types for watertight, nonflexing service are as
follows:
Electronic, communication and instrumentation:
Type MSPW 59 conductors (8 shielded
pairs, 3 shielded triads,
34 shielded singles)
TSP 11 and 31 pairs 300 V
Downloaded from http://www.everyspec.com
