mil DTL 1115e (w interim amendment1 used in lieu of mil DTL 1115e dtd 10 Sep 2013)) detail specification enamel interior exterior alkyd white (formula no. 30) (10 Sep 2013)

ID:51630

大小:0.29 MB

页数:42页

时间:2023-03-23

金币:20

上传者:战必胜
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN: SEA 05S, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or
emailed to CommandStandards@navy.mil, with the subject line “Document Comment”. Since contact information
can change, you may want to verify the currency of this address information using the ASSIST Online database at
https://assist.dla.mil.
AMSC N/A FSC 8010
METRIC
MIL-DTL-1115E(SH)
w/INT. AMENDMENT 1
10 September 2013
USED IN LIEU OF
MIL-DTL-1115E
12 October 2010
DETAIL SPECIFICATION
ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30)
This specification is approved for interim use by the Naval Sea Systems Command, Department of the Navy.
Other activities in the Department of Defense may use this interim amendment or may continue using
MIL-DTL-1115E.
1. SCOPE
1.1 Scope. This specification covers enamel that has been formulated to comply with air pollution regulations
which allow a maximum volatile organic compound (VOC) content of 250 grams of solvent minus water per liter of
paint (2.08 lb/gal) as delivered. The paint is a special-purpose, white, alkyd enamel (Formula no. 30) for interior use
over either primed steel or primed aluminum (see 6.1). The paint is supplied in a single can and is used as supplied
without thinning.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
TT-P-645
-
Primer, Paint, Zinc-Molybdate, Alkyd Type
FEDERAL STANDARDS
FED-STD-141
-
Paint, Varnish, Lacquer and Related Materials: Methods of Inspection,
Sampling and Testing
FED-STD-313
-
Material Safety Data, Transportation Data, and Disposal Data for
Hazardous Materials Furnished to Government Activities
FED-STD-595/17875
-
Miscellaneous, Gloss
Downloaded from http://www.everyspec.com
资源描述:

当前文档最多预览五页,下载文档查看全文

此文档下载收益归作者所有

当前文档最多预览五页,下载文档查看全文
温馨提示:
1. 部分包含数学公式或PPT动画的文件,查看预览时可能会显示错乱或异常,文件下载后无此问题,请放心下载。
2. 本文档由用户上传,版权归属用户,天天文库负责整理代发布。如果您对本文档版权有争议请及时联系客服。
3. 下载前请仔细阅读文档内容,确认文档内容符合您的需求后进行下载,若出现内容与标题不符可向本站投诉处理。
4. 下载文档时可能由于网络波动等原因无法下载或下载错误,付费完成后未能成功下载的用户请联系客服处理。
关闭