INCH-POUND
MIL-DTL-2212H(SH)
10 February 1997
SUPERSEDING
MIL-C-2212G(SH)
12 February 1990
(See 6.9)
MILITARY SPECIFICATION
CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR
AC OR DC, AND ASSOCIATED SWITCHING DEVICES
This specification is approved for use by the Naval Sea Systems
Command, Department of the Navy, and is available for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope
. This specification covers alternating current (ac) and direct
current (dc) motor controllers and associated switching devices. Included are
manual and magnetic controllers, controller parts, limit switches, pressure
switches, temperature switches, selector switches, push-buttons, and similar
devices used for control of electric motors. Semiconductor (solid-state) devices
used as parts for magnetic controllers are included.
2. APPLICABLE DOCUMENTS
2.1 General
. The documents listed in this section are specified in sections
3 and 4 of this specification. This section does not include documents cited in
other sections of this specification or recommended for additional information or
as examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all specified requirements
of documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
2.2 Government documents
.
2.2.1 Specifications, standards, and handbooks
. The following specifi-
cations, standards, and handbooks form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index of Specifications and
Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2).
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander, Naval Sea Systems Command, SEA 03R42, 2531 Jefferson Davis Hwy.,
Arlington, VA 22242-5160 by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A FSC 6110
Downloaded from http://www.everyspec.com
