MIL-DTL-2439G
03 July 2014
SUPERSEDING
MIL-DTL-2439F
05 February 2010
DETAIL SPECIFICATION
CONTAINER, AMMUNITION, FIBER, SPIRALLY WOUND
This specification is approved for use by U.S. Army Armament Research, Development and
Engineering Center (ARDEC), and is available for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for spirally wound fiber
ammunition containers.
1.2 Classification. Six types of fiber containers and three classes of metal ends defined, as
specified (see 6.2):
1.2.1 Types. The types of fiber containers are as follows:
Type I - With two layers of aluminum foil
Type II - With one layer of aluminum foil
Type III - Without aluminum foil
Type IV - With two layers of aluminum foil and resin impregnated
Type V - With poly laminated layers without aluminum foil
Type VI - With poly laminated layers and two layers of aluminum foil
Comments, suggestions, or questions on this document should be addressed to the Commander,
U.S. Army ARDEC, ATTN: RDAR -QES-E, Picatinny, NJ 07806-5000 or emailed to
usarmy.picatinny.ardec.list.ardec-stdzn-branch@mail.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.dla.mil.
ASMC N/A FSC 8140
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
