AMSC N/A FSC 8140
DISTRIBUTION STATEMENT A
. Approved for public release; distribution is unlimited.
Comments, suggestions, or questions on this document should be addressed to: Commander, US Army
ARDEC, Attn: AMSRD-AAR-QES-E, Picatinny, New Jersey 07806-5000 or emailed to
ardecstdzn@conus.army.mil
. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST online database at http://assist.daps.dla.mil
.
MIL-DTL-3060F (AR)
23 June 2008
SUPERSEDING
MIL-B-3060E (AR)
12 December 1979
DETAIL SPECIFICATION
BOXES, SMALL ARMS AMMUNITION – M19A1 AND M2A1
This specification is approved for use by the US Army Armament Research, Development and
Engineering Center (ARDEC), and is available for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 This specification covers two model steel containers for shipping and storing ammunition (see
6.1).
1.2 Classification. The Boxes are described as follows
:
1.2.1 M19A1
. The M19A1 is a 3.23 cubic foot air tight metal can used to store and field
ammunition.
1.2.2 M2A1
. The M2A1 is a 4.33 cubic foot air tight metal can used to store and field
ammunition.
2. APPLICABLE DOCUMENTS
2.1 General
. The documents listed in this section are specified in sections 3, or 4 of this standard.
This section does not include documents cited in other sections of this standard or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements of documents cited
in sections 3, or 4 of this standard, whether or not they are listed.
2.2 Government documents
.
2.2.1 Specifications, standards, and handbooks
. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
–
Downloaded from http://www.everyspec.com
