INCH-POUND
MIL-DTL-3100H
1 December 1998
SUPERSEDING
MIL-DTL-3100G
30 September 1998
DETAIL SPECIFICATION
WHEEL ASSEMBLIES, SOLID ELASTOMER TIRED;
FOR TRACK LAYING VEHICLES
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers road wheels, track support rollers, and idler wheels
for use on military track laying vehicles. These are metal wheels with bonded solid elastomer tires
(see 6.1).
1.2 Classification. (See 6.5.)
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirement documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: U.S. Army Tank-automotive and
Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document, or by letter.
AMSC N/A FSC 2630
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
