INCH-POUND
MIL-DTL-3301D
08 October 2008
SUPERSEDING
MIL-C-3301C
15 September 1970
And Amendment 2
26 April 1995
DETAIL SPECIFICATION
COMPOUND, ASPHALTIC, HOT-MELT (CAVITY LINING)
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1. Scope. This specification covers a hot-melt asphaltic compound for coating the inner walls of metal
cases prior to filling with explosives.
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements of documents cited
in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-129 Military Marking for Shipment and Storage
MIL-STD-147 Palletized Unit
MIL-STD-286 Propellants, Solid: Sampling, Examination and Testing
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-248 Trinitrotoluene (TNT)
MIL-DTL-512 Aluminum Powder, Flaked, Grained, and Atomized
Comments, suggestions, or questions on this document should be addressed to DEPARTMENT OF THE NAVY, Indian
Head Division, NSWC, Code E11G3, Document Control, 4072 North Jackson Road, Suite 106, Indian Head, MD 20640-
5115 OFFICIAL BUSINESS, or emailed to amanda.penn@navy.mil. Since contact information can change, you may
want to verify the currency of this information using the ASSIST Online database at http://assist.daps.dla.mil
.
AMSC N/A FSC 8030
Downloaded from http://www.everyspec.com
