NOT MEASUREMENT
SENSITIVE
MIL-DTL-3688D
18 July 2005
SUPERSEDING
MIL-W-3688C
23 December 1987
DETAIL SPECIFICATION
WAX EMULSION (RUST INHIBITING)
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1
Scope. This specification covers a type of wax emulsion suitable for use as a rust inhibiting
coating for general weatherproofing when applied to articles (see 6.1).
2. APPLICABLE DOCUMENTS
2.1
General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification,
whether or not they are listed.
2.2
Government documents.
2.2.1
Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
QQ-S-698 - Steel, Sheet and Strip, Low Carbon .
Comments, suggestions, or questions on this document should be addressed to: Director,
Army Research Laboratory, Weapons and Materials Research Directorate, Materials
Applications Branch, Specifications and Standards Office, Attn: AMSRD-ARL-WM-MC,
Aberdeen Proving Ground, MD 21005-5069 or emailed to rsquilla@arl.army.mil. Since
contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at
http://assist.daps.dla.mil/.
AMSC N/A FSC 8030
Downloaded from http://www.everyspec.com
