MIL-DTL-3922C
w/AMENDMENT 1
24 May 2006
SUPERSEDING
MIL-DTL-3922C
6 March 2000
DETAIL SPECIFICATION
FLANGES, WAVEGUIDE, GENERAL PURPOSE,
GENERAL SPECIFICATION FOR
This specification is approved for use by all depart-
ments and agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for general purpose waveguide flanges that
are used to couple mechanically and electrically two sections of waveguides or waveguide parts (see 6.2).
1.2 Classification
.
1.2.1 Type designation. The type designation of waveguide flanges is derived from the AN nomenclature
system specified in MIL-STD-196 and from the Part or Identifying Number (PIN) (see 3.1, 6.1 and 6.3).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all specified requirements cited in sections 3, 4 or 5
of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, Standards and Handbooks. The following specifications, standards and handbooks
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are, cited in the solicitation or contract (see 6.2).
FEDERAL SPECIFICATIONS
FF-S-85 - Screw, Cap, Slotted and Hexagon Head.
FF-S-86 - Screw, Cap, Socket Head.
FF-W-84 - Washers, Lock (Spring) (inactive for new design).
FEDERAL STANDARDS
FED-STD-H28 - Screw-Thread Standards for Federal Services.
Comments, suggestions, or questions on this document should be addressed to Defense Supply Center
Columbus, DSCC-VAT, P.O. Box 3990, Columbus, OH 43218-3990 or e-mailed to TubesAmps@dscc.dla.mil
.
Since contact information can change, you may want to verify the currency of this address information using
ASSIST Online database at http://assist.daps.dla.mil/.
AMSC N/A FSC 5985
INCH-POUND
Downloaded from http://www.everyspec.com
