o
~
MIL-N-5877E
1992
Superseding
MIL-N-5g77D
16 October 1986
MILITARY SPECIFICATION
NOZZLE, PRESSURE FUEL SERVfCING,
LOCKfNG, TYPE D-1, D-IR, D-2 AND D-2R,
NOMINAL 2$ INCH DIAMETER
This specification is approved for use by all Departments and
b
Agencies of the Depm-rmem of Defense.
r
:.
1. SCOPE
1.1 - This document specifies the requirements for four types of locking pressure
fuel servicing nozzles, designated Types D-1, D-IR, D-2 and D-2R, which have a nominal
inlet diameter of 2%inches.
1.2 ~.
Nozzles shall be of the following types, as specified (see 6.2):
@
Type
Mili[ary Smndard
lnlel
Pressure
Designation Number Configurmicm
Regulation
D-1 MS29520
45. Elbow None
D-lR MS29520 45. Elbow, 55 psi
D-2 MS29520
Straight
None
D-2R MS29520
Straight
55 psi
,
All types employ a swivel fitting to faci]imte hose handling during refueling.
2. Applicable DOCUMENTS
2.1 ~.
2.1.1 ~
The following specifications and standards form a
pm-tof this document to the extent specified herein. Urrlcss o[herwise specified, the issues
of these documents are those lisied in the issue of !hc Department of Defense Index of
Specitleations and Standards (DODISS) and supplemem thereto, cited in the solicitation
(see 6.2).
Bcnclicial Commcois (rccnmmendaiiou ndditionsdclc(hs) and any pcr[incm data which mtsy bc cd usc
in “reproving Ibis document should be addressed to: NIN-JIAir Sywems Commmd, AI R.5363, Wmbingron,
DC Z0361.SXO, by using the self-addressed Stimdmduxion Document Imprmtmcnt Proposal (DD
Form 1476) amenrinx II!the cnd of thu documeni or bv kttcr.
AMSC NfA F3c 493rl
~MENT A. Appmwd for pubtic rclcasq dismibutionis untimitcd.
Downloaded from http://www.everyspec.com
