DATA ITEM DESCRIPTION
Form Approved
OMB No. 0704-0188
Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions,
searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments
regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington
Headquarters Services, Directorate for information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and
to the Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington, DC 20503.
1. TITLE 2. IDENTIFICATION NUMBER
DEVELOPMENTAL DESIGN DRAWINGS AND ASSOCIATED
LISTS DI-DRPR-81002A
3. DESCRIPTION/PURPOSE
3.1 Developmental Design Drawings and Associated Lists define engineering design approaches. They are used to
support design analyses and the development of prototype hardware.
4. APPROVAL DATE
970521
5. OFFICE OF PRIMARY RESPONSIBILITY(OPR)
AR
6a. DTIC REQUIRED 6b. GIDEP REQUIRED
7. APPLICATION/INTERRELATIONSHIP
7.1 This Data Item Description (DID) contains the format and content preparation instructions for Developmental
Design Drawings and Associated Lists resulting from the work task described in 3.6.2 of MIL-DTL-31000A.
7.2 This DID is applicable to acquisitions of military systems, equipment, and components. It is intended for use
primarily during the concept demonstration/validation phase of the DoD materiel life-cycle.
(Continued on page 2)
8. APPROVAL LIMITATION 9a. APPLICABLE FORMS 9b. AMSC NUMBER
D7276
10. PREPARATION INSTRUCTIONS
10.1 Reference Documents. The applicable issue of documents cited herein, including their approval dates and the dates of
applicable amendments, notices, and revisions, shall be as cited in the contract.
10.2 General. Developmental Design Drawings and Associated Lists shall be in accordance with MIL-DTL-31000Aand
the Selection Work Sheet incorporated into the contract.
10.3 Format. Drawings and associated lists shall be in either the contractor’s or Government’s format as specified on
the Selection Work Sheet incorporated into the contract.
10.4 Content. Developmental Design Drawings and Associated Lists shall define an engineering design approach
in detail. These drawings shall:
a. Support the evaluation of the inherent ability of the design approach to meet the stated military requirement and,
b. Support the development of prototype hardware, including computer software if applicable, for test or
experimentation.
(Continued on page 2)
11. DISTRIBUTION STATEMENT
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
DD Form 1664, APR 89 (EF-V1) Previous editions are obsolete. Page _1_ of _2_pages
Downloaded from http://www.everyspec.com
