DATA ITEM DESCRIPTION
Form Approved
OMB No. 0704-0188
Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions,
searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments
regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington
Headquarters Services, Directorate for information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and
to the Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington, DC 20503.
1. TITLE
SPECIAL TOOLING (ST) DRAWINGS AND ASSOCIATED LISTS
2. IDENTIFICATION NUMBER
DI-DRPR-81008A
3. DESCRIPTION/PURPOSE
3.1 Special Tooling (ST) drawings and associated lists provide the data required for the limited production of ST which
duplicates the physical and performance characteristics of the original ST.
4. APPROVAL DATE
970521
5. OFFICE OF PRIMARY RESPONSIBILITY(OPR)
AR
6a. DTIC REQUIRED 6b. GIDEP REQUIRED
7. APPLICATION/INTERRELATIONSHIP
7.1 This Data Item Description (DID) contains the format and content preparation instructions for ST drawings
and associated lists resulting from the work task described by 3.6.6 of MIL-DTL-31000A.
7.2 This DID is applicable to acquisition of military systems, equipment, and components which require the use of
special tooling to achieve the engineering requirements of the item.
(Continued on page 2)
8. APPROVAL LIMITATION 9a. APPLICABLE FORMS 9b. AMSC NUMBER
D7279
10. PREPARATION INSTRUCTIONS
10.1 Reference Documents. The applicable issue of documents cited herein, including their approval dates and the dates
of applicable amendments, notices, and revisions, shall be as cited in the contract.
10.2 General. ST drawings and associated lists shall meet the requirements of MIL-DTL-31000A. ST drawings and
associated lists shall be in accordance with, ASME Y14.100M, ASME Y14.34M, and, where DoD peculiar requirements
must be met, MIL-STD-100, except as noted herein.
10.3 Format. ST drawings and associated lists shall be in contractor or Government format or as specified.
10.4 Content. ST drawings and associated lists shall provide the design disclosure information necessary to permit the
manufacture of tooling that duplicates the functions of the original ST. ST drawings and associated lists shall provide:
a. Details of processes which are not published or generally available to industry, when these processes are
mandatory to achieving the engineering requirements of the tooling.
(Continued on page 2)
11. DISTRIBUTION STATEMENT
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
DD FORM 1664, APR 89 (EF-V1) PREVIOUS EDITIONS ARE OBSOLETE. Page _1_ of _2_pages
Downloaded from http://www.everyspec.com
