DATA ITEM DESCRIPTION
Title: ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (E3) INTEGRATION AND
ANALYSIS REPORT (E3IAR)
Number: DI-EMCS-81540B Approval Date: 20100725
AMSC Number: 9154 Limitation:
DTIC Applicable: No GIDEP Applicable: No
Office of Primary Responsibility: 11
Applicable Forms:
Use/relationship: The E3IAR describes implementation of E3 interface and performance requirements
into system hardware and software and provides the means for the government to evaluate E3 compliance
with requirements throughout the life cycle of the system.
a. This DID contains the format and content preparation instructions for data resulting from the work
task described by 4.1 of MIL-STD-464 and is intended for airborne, sea, space, and ground systems,
including associated ordnance. It is normally applied to the System Design and Development phase of a
program, but it can be used in any phase.
b. This DID is related to DI-EMCS-81541B and DI-EMCS-81542B.
Requirements:
1. Reference documents. The applicable issue of the documents cited herein, including their approval
dates and dates of any applicable amendments, notices, or revisions, shall be as cited in the solicitation or
contract.
2. Format. The E3IAR shall be in contractor format.
3. Content. The E3IAR shall describe the application of the E3 requirements and translation of these
requirements into the system software and hardware to achieve a cost-effective system. The E3IAR shall
address the overall integration of the various requirements into a single system design which complies
with the interface and performance requirements.
3.1 Summary information. The E3IAR shall summarize the following:
3.1.1 Introduction, background.
a. System description.
b. Statement of the electromagnetic environments for the system and their impact on the item being
developed.
c. Statement of any assumptions used in developing the design.
3.1.2 Body. Synopsis of each of the elements contained in section 3.2 below.
3.2 Detailed information. E3 technical areas. The E3IAR shall provide specific technical descriptions
for each of the following E3 technical areas that are included in contractually imposed requirements. For
each requirement, the analysis report shall document the information in the subsequent subsection.
a. Margins.
b. Intra-system electromagnetic compatibility, including where applicable: ship hull intermodulation
interference, shipboard internal electromagnetic environments, and multipaction.
1
Downloaded from http://www.everyspec.com
